APRILIA SL 750 SHIVER Specifications download pdf (Page 45)

100

101

Replacement

Check the engine oil level frequently.

To change the oil:

CAUTION

HOT OIL IS MORE FLUID AND WILL DRAIN

OUT MORE EASILY AND COMPLETELY; IDE-

AL TEMPERATURE IS REACHED AFTER THE

ENGINE HAS RUN FOR ABOUT TWENTY MI-

NUTES.

OIL BECOMES VERY HOT WHEN THE ENGINE

IS HOT; BE CAREFUL NOT TO GET BURNED

WHEN CARRYING OUT THE OPERATIONS DE-

SCRIBED BELOW.

•

Use a cloth to wipe off any mud deposit on the area next to the filler plug (1).

•

Place a container with + 4000 cm³ (244 cu.in) capacity under the drainage plug (2).

•

Unscrew and remove the drainage plug (2).

•

Unscrew and remove the filler plug (1).

•

Drain the oil into the container; allow several minutes for oil to drain out completely.

•

Replace the sealing washer of the drainage plug (2).

•

Remove any metal scrap attached to the drainage plug (2) magnet.

•

Screw and tighten the drainage plug (2).

Locking torques (N*m)

Oil drainage plug - M16x1.5 19 Nm (14.01 lbf ft)

•

Replace the oil filter.

•

Fill up to the right engine oil level by adding recommended engine oil.

Comments to this Manuals

No comments

APRILIA SL 750 SHIVER Specifications Page 45

Comments to this Manuals

Related products and manuals for Motorcycles APRILIA SL 750 SHIVER