APRILIA SL 750 SHIVER Specifications download pdf (Page 47)

•

Working on both ducts, turn the upper

part of the intake ducts anticlockwise

and remove it.

•

Remove the filtering element.

COVER THE INTAKE DUCTS WITH A CLEAN

CLOTH SO THAT FOREIGN BODIES DO NOT

GET INTO THE INLET DUCTS. UPON REFIT-

TING AND BEFORE PLACING THE FILTER

CASING COVER, MAKE SURE NEITHER THE

CLOTH NOR ANY OTHER OBJECT HAS BEEN

LEFT INSIDE THE FILTER CASING. MAKE

SURE THE FILTERING ELEMENT IS COR-

RECTLY PLACED SO THAT UNFILTERED AIR

DOES NOT FLOW IN. DO NOT FORGET THAT

EARLY WEAR OF THE PISTON RINGS AND

THE CYLINDER CAN BE CAUSED BY A MAL-

FUNCTIONING OR MISPLACED FILTERING

ELEMENT.

REFITTING

•

Upon refitting, pay attention when inserting intake ducts and check that the bayonet joint is

released once every duct has been inserted and rotated.

Checking the valve clearance

The following operation can be carried out also with the engine fitted on the vehicle.

•

Remove both head covers.

CAUTION

WHENEVER THE HEAD COVER IS REMOVED, ALL FOUR RUBBER RINGS AND THE GASKET

SHOULD BE REPLACED.

SL 750 SHIVER Maintenance

MAIN - 11

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 302 303

No comments

APRILIA SL 750 SHIVER Specifications Page 47