See also
Removing the cylinder head
Removing the cylinder
Checking the cylinder
•
All seal surfaces must be clean and flat.
•
Make sure all threads are in proper conditions.
•
Check cylinder sliding surface for signs of friction and scratches. Also check the seal sur-
faces for damages.
CAUTION
IF THE GROOVES ON THE CYLINDER LINER ARE EVIDENT, REPLACE THE CYLINDER AND
THE PISTON.
•
Clean off lime scales on the cylinder
cooling slots.
•
Measure the cylinder bore at a dis-
tance of 10 - 43 - 90 mm (0.39 - 1.69 -
3.54 in) from the head coupling sur-
face; the highest value should be
considered to estimate wear limits.
Cylinder bore "C": 92.000 mm (3.6220 - in) C=
D1 or D2 max
Cylindricity tolerance: 0.020 mm (0.00079 in)
Replace the cylinder, the piston and the piston ring
all together if not complying with specifications.
Engine SL 750 SHIVER
ENG - 42
Comments to this Manuals