APRILIA SL 750 SHIVER Specifications download pdf (Page 244)

Bending limit:

0.2 mm (0.00787 in)

Sleeve

Check that there are no damages and/or cracks; otherwise, replace it.

Spring

Check that the spring is in good conditions. Check that the spring length is within the limit value.

Replace the spring if its length does not fall within the limit values.

SPRING MINIMUM LENGTH WHEN UNLOADED: 300.8 mm (11.84 in)

Check that the following components are in good

conditions:

•

sliding bushing;

•

guide bushing;

•

pumping member.

If there are signs of excessive wear or damage, replace the affected component.

CAUTION

REMOVE ANY IMPURITY IN THE BUSHINGS, TAKING CARE NOT TO SCRATCH THEIR SUR-

FACE.

Replace the following components with new ones:

•

oil seal

•

dust guard

Reassembling the fork

NOTE

THE OPERATIONS DESCRIBED BELOW ARE VALID FOR BOTH STEMS.

•

Fit the dust guard (1), Seeger ring (2),

oil seal (3), ring (4), guide bushing (5)

and sliding bushing (6) on the stem.

CAUTION

FIT THE GUIDE BUSHING AND THE SLIDING

BUSHING WITH CAUTION.

GUIDE BUSHING (5) IS THICKER THAN SLID-

ING BUSHING (6).

Suspensions SL 750 SHIVER

SUSP - 14

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 302 303

No comments

APRILIA SL 750 SHIVER Specifications Page 244