APRILIA SL 750 SHIVER Specifications download pdf (Page 11)

Press the relevant safety hooks, if any.

•

Grip the two connectors and disconnect them by pulling them in opposite directions.

•

If there are signs of dirt, rust, humidity, etc., clean the connector internal parts carefully using

a pressurised air jet.

•

Make sure that the cables are correctly linked to the connector internal terminal ends.

•

Then insert the two connectors making sure that they couple correctly (if the relevant hooks

are provided, you will hear them "click" into place).

CAUTION

TO DISCONNECT THE TWO CONNECTORS, DO NOT PULL THE CABLES.

NOTE

THE TWO CONNECTORS CONNECT ONLY FROM ONE SIDE: CONNECT THEM THE RIGHT WAY

ROUND.

TIGHTENING TORQUE

CAUTION

DO NOT FORGET THAT THE TIGHTENING TORQUE OF ALL FASTENING ELEMENTS ON

WHEELS, BRAKES, WHEEL SPINDLES AND OTHER SUSPENSION COMPONENTS PLAY A KEY

ROLE IN ENSURING THE VEHICLE'S SAFETY AND MUST COMPLY WITH SPECIFIED VALUES.

CHECK THE TIGHTENING TORQUE OF FASTENING PARTS ON A REGULAR BASIS AND AL-

WAYS USE A TORQUE WRENCH TO REASSEMBLE THESE COMPONENTS. FAILURE TO COM-

PLY WITH THESE RECOMMENDATIONS MAY CAUSE ONE OF THESE COMPONENTS TO GET

LOOSE AND EVEN DETACHED, THUS BLOCKING A WHEEL, OR OTHERWISE COMPROMISE

VEHICLE HANDLING. THIS CAN LEAD TO FALLS, WITH THE RISK OF SERIOUS INJURY OR

DEATH.

Running-in

Engine run-in is essential to ensure engine long life and correct operation. Twisty roads and gradients

are ideal to run in engine, brakes and suspensions effectively. Vary your driving speed during run-in.

In this way, you allow for the work of components to be "loaded" and then "unloaded", thus cooling

engine parts.

CAUTION

ONLY AFTER THE SERVICE AT THE END OF THE RUN-IN PERIOD CAN THE BEST PERFORM-

ANCE OF YOUR VEHICLE BE OBTAINED.

Follow the guidelines detailed below:

•

Do not twist the throttle grip abruptly and completely when the engine is working at a low

revs, either during or after run-in.

•

During the first 100 km (62 miles) operate the brakes with caution, avoid rough and long

braking. That is to permit the adequate adjustment of the pad friction material to the brake

discs.

AFTER THE SPECIFIED MILEAGE, TAKE YOUR VEHICLE TO AN Official aprilia Dealer FOR THE

CHECKS INDICATED IN THE "AFTER-RUN-IN" TABLE IN THE SCHEDULED MAINTENANCE

SECTION, TO AVOID INJURING YOURSELF, OTHERS AND/OR DAMAGING THE VEHICLE.

SL 750 SHIVER Characteristics

CHAR - 5

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 302 303

Comments to this Manuals

No comments

APRILIA SL 750 SHIVER Specifications Page 11

Comments to this Manuals

Related products and manuals for Motorcycles APRILIA SL 750 SHIVER