APRILIA SL 750 SHIVER Specifications download pdf (Page 185)

•

Using the specific template, check the

correct position of the cams.

NOTE

USE OF THE TEMPLATE: THIS TOOL IS

PLACED ON THE CAMS WITHOUT THE CAM

CAPS, USING THE PROFILE MARKED WITH

THE NUMBER OF THE CYLINDER BEING

USED, WITH THE MARKINGS FACING THE

FLYWHEEL SIDE.

NOTE

THE TEMPLATE IS NOT A TOOL DESIGNED

FOR TIMING BUT FOR IDENTIFYING THE COR-

RECT DIRECTION FOR CAMSHAFT FITTING

(THE SHAFTS MAY BE FITTED ROTATED BY

180° WITH REFERENCE TO THE CORRECT

POSITION).

Specific tooling

020723Y Template for timing overhead cam-

shafts

•

Place the cam cap.

•

Pre-tighten the eight screws in the se-

quence indicated, to the prescribed tor-

que.

•

Tighten the eight screws in the se-

quence indicated, to the prescribed tor-

que.

•

Carry out camshaft timing with the ap-

propriate dowels.

Specific tooling

020719Y Timing pin

Locking torques (N*m)

Cam cap/head fixing screws - M6 (16) Pre-tight-

ening: (4.90 - 6.86) Nm ((3.61 - 5.06) lbf ft) Tight-

ening: (9.81 - 12.75) Nm ((7.24 - 9.40) lbf ft)

CAUTION

INSTALL THE CAMSHAFT TIGHTENING NUTS WITH THE MARK FACING UP.

•

Pre-tighten the gear nut on the camshaft.

REFIT THE NUT WITH THE MACHINED SURFACE FACING THE GEAR (THE MATERIAL ACRO-

NYM SHOULD BE VISIBLE).

Locking torques (N*m)

Nut fixing camshaft gears (pre-tightening) - M15x1 (4) 30 Nm (22.13 lbf ft)

SL 750 SHIVER Engine

ENG - 37

1 2 ... 180 181 182 183 184 185 186 187 188 189 190 ... 302 303

Comments to this Manuals

No comments

APRILIA SL 750 SHIVER Specifications Page 185

Comments to this Manuals

Related products and manuals for Motorcycles APRILIA SL 750 SHIVER