APRILIA NORGE GT 8V Service Manual Page 177

  • Download
  • Add to my manuals
  • Print
  • Page
    / 219
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 176
04_30
04_31
A quick procedure to check the correct
adjustment of the front light beam:
Place the vehicle 32.8 ft (10 m)
from a vertical wall, making sure
that the ground is level.
Turn on the low beam light, sit
on the vehicle and check that
the light beam projected to the
wall is a little below the headlight
horizontal straight line (about
9/10 of the total height).
TO SET THE VERTICAL LIGHT BEAM
HEIGHT:
Place the vehicle on the center
stand.
Move the instrument panel.
Adjust the orientation of the low
light beam working on the screw
(1).
Adjust the orientation of the high
light beam working on the screw
(3).
TIGHTENING (clockwise) raises the
light beam.
LOOSENING (counterclockwise) low-
ers the light beam.
At the end of the adjustment:
IMPORTANT
VERIFY THAT THE LIGHT BEAM IS AT
THE CORRECT ANGLE AND RE-
PLACE THE INSTRUMENT PANEL.
Pour une vérification rapide de l'orienta-
tion correcte du faisceau lumineux avant :
Placer le véhicule à 32,8 ft (10
m) de distance d'un mur vertica-
le, en s'assurant que le terrain
soit plat.
Allumer le feu de croisement,
s'asseoir sur le véhicule et véri-
fier si le faisceau lumineux pro-
jeté sur le mur se trouve légère-
ment au-dessous de l'axe
horizontal du projecteur (envi-
ron 9/10 de la hauteur totale).
POUR EFFECTUER LE RÉGLAGE
VERTICAL DU FAISCEAU LUMINEUX :
Placer le véhicule en axe verti-
cal
Déplacer la planche.
En agissant sur la vis (1), régler
l'inclination du feu de croise-
ment.
En agissant sur la vis (3), régler
l'inclination du feu de route.
EN VISSANT (sens des aiguilles d'une
montre) le faisceau lumineux s'élève.
EN DÉVISSANT (sens inverse des ai-
guilles d'une montre) le faisceau lumi-
neux s'abaisse.
À la fin du réglage:
ATTENTION
VÉRIFIER LA CORRECTE ORIENTA-
TION VERTICALE DU FAISCEAU LU-
177
4 Maintenance / 4 L’entretien
Page view 176
1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 218 219

Comments to this Manuals

No comments