APRILIA RS 125 Owner's Manual download pdf (Page 90)

ENGINE

4 - 26

RS125

• Position the gearbox connecting rod and tighten the

screw.

• Install the radiator, see (REMOVING THE

RADIATOR).

• Install the complete exhaust, see (REMOVING THE

EXHAUST SYSTEM).

• Install the lower cowl, see (REMOVING THE LOWER

COWL).

• Install the lower fairings, see (REMOVING THE

LOWER FAIRINGS).

• Install the lower cover, see (REMOVING THE LOWER

COVER).

• Install the fuel tank, see (REMOVING THE FUEL

TANK).

• Install the side fairings, see (REMOVING THE SIDE

FAIRINGS).

After installing the engine, perform the following procedures.

• Ensure the engine mounting screws/nuts are at the

correct tightening torque.

• Top up coolant level, see (COOLANT).

• Check drive chain tension and adjust as required, see

(DRIVE CHAIN).

NOTE Check all components that have been removed and

refitted, taking care to ensure that:

- wiring is firmly secured with suitable ties;

WARNING

Wiring must not be twisted and/or trapped

under any components.

• wiring connectors are matched to the correct

components;

• hoses and couplings are correctly in place and firmly

secured with suitable clamps;

• throttle and choke cables slide freely and do not bind

when handlebar is turned.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 193 194

No comments

APRILIA RS 125 Owner's Manual Page 90